Google+
Performance Hardware

ARP 2000 Porsche 356 912 head stud kit inc. lube. Use stock fasteners.

RND Engines RS Roller Bearing Kit

RND Roller Bearing IMS Retrofit kit is the only solution on the market that uses proper heat treated, 52100 bearing steel thrust surfaces on both sides and provides true thrust control integral to the bearing.

RS Roller Bearing KitT

ARP 2000 Porsche 356 912 head stud kit inc. lube. Use stock fasteners.

$329.00

In stock

SKU: 202-01

ARP's head studs are proven and tested for a lifetime of reliability and performance and are required for use with Nickies cylinders. (ARP or equivalent upgraded head studs can be used where OE head studs are not compatible or recommended)

Description

Details

The reason for offering replacement studs stems from the fact that our testing found that no available head stud was compatible with our Nickies or any aluminum cylinders for that matter, with exception of the 911 models equipped with aluminum cylinders from the factory. In most cases, the factory head studs are unable to perform satisfactorily under the increased expansion of an aluminum cylinder, in most cases leading to head leaks and fastener fatigue.

 

On 911 models, certain engines came fitted with Dilivar head studs, which were designed to match the expansion of the cylinders, but also suffered from hydrogen embrittlement, which is a condition that results from the accumulation of hydrogen gas in the atomic structure of the metal. This gas flows to the point of high stress (stress risers) and causes microscopic cracks. The hydrogen then flows to the “new” crack tip and causes it to crack further. In this way the crack moves across the part, because the crack-tip IS the stress riser. Finally the crack gets so large that the section is not large enough to support the load. Hydrogen embrittlement can take place without tensile stress. ARP® employs a baking process that purges hydrogen gas from the steel, eliminating this problem.

Additional

Additional Information

Brand No

Important Seller's Note

Products and services provided by Seller have the potential to substantially raise the torque and horsepower output of an engine. Additionally, high performance parts exert greater stress on engine components. Seller assumes no responsibility for injury or damage resulting from increased torque and horsepower output or failure of any components due to Seller's products and services. Seller urges that Seller's products not be used unless, after an engine has been modified with Seller's parts and services, the owner is able to operate safely, and is willing to accept responsibility for the effects Seller's products and services may have.

It is important to read, understand and accept our Sales and Limited Warranty Terms and Conditions. Privacy Policy can be found here.


Questions or comments? Feel free to contact us before ordering at 815.472.2939 or info@lnengineering.com