Google+
Auto Verdi

Auto Verdi Pro Series 3-Stage Billet GT3 Oil Pump (32mm)

RND Engines RS Roller Bearing Kit

RND Roller Bearing IMS Retrofit kit is the only solution on the market that uses proper heat treated, 52100 bearing steel thrust surfaces on both sides and provides true thrust control integral to the bearing.

RS Roller Bearing KitT

Auto Verdi Pro Series 3-Stage Billet GT3 Oil Pump (32mm)

$2,599.00

Contact us for availability and ordering info

SKU: AVPGT3B

Auto Verdi Pro Series 3-Stage Billet GT3 Oil Pump - 32mm pressure side gears. **Special Order Item**


**Note: Case modification/clearancing may be required depending on what engine case is being used, same as with factory gt3 oil pumps**


Download Block Modification Instructions (166kB)

Description

Details

Pumps come pre-clearanced for most connecting rods and longer stroke crankshafts. Pump weighs 7.5 lbs. The version with 32mm pressure side gears is designed for all watercooled 911 (GT3, GT2, and Turbo applications with Mezger engine). For race applications requiring extreme oiling, 34mm pressure side gears are available special order. Auto Verdi dry sump oil pumps offer more than just enough oil flow and pressure to your race engine. With lower internal friction losses they take less power away from your engine to run at maximum horsepower. The free hp and best available vacuum give your race engine every advantage. Dyno tests have proven 3-6 hp gains on a well-sealed race engine still maintaining oil pump performance. Use this extra hp to get ahead of the competition. Housings and scavenge rotors are made of a very rigid high quality aircraft aluminum alloy. The material allows for very tight machining tolerances without distortion under maximum loads. The aluminum parts are anodized before PTFE-coating to make for better adhesion. Pressure gears are made of the same quality steel as transmission gears. They are very hard and precision ground to withstand long cycle periods. A Balanit C coating is also applied for minimum friction. The rigid construction of our oil pumps makes them very durable in any kind of racing. Auto Verdi is the leading supplier of oil pumps for NASCAR. **Note: Case modification/clearancing may be required depending on what engine case is being used, same as with factory gt3 oil pumps**

Additional

Additional Information

Brand No

Important Seller's Note

Products and services provided by Seller have the potential to substantially raise the torque and horsepower output of an engine. Additionally, high performance parts exert greater stress on engine components. Seller assumes no responsibility for injury or damage resulting from increased torque and horsepower output or failure of any components due to Seller's products and services. Seller urges that Seller's products not be used unless, after an engine has been modified with Seller's parts and services, the owner is able to operate safely, and is willing to accept responsibility for the effects Seller's products and services may have.

It is important to read, understand and accept our Sales and Limited Warranty Terms and Conditions. Privacy Policy can be found here.


Questions or comments? Feel free to contact us before ordering at 815.472.2939 or info@lnengineering.com