Google+
KW Suspension Systems

KW Variant 1 (pre-set damping) Coilover Kit  for Porsche 911 (996) Carrera 4, 4S; incl. Convertible + Targa, 911 (996) Turbo

RND Engines RS Roller Bearing Kit

RND Roller Bearing IMS Retrofit kit is the only solution on the market that uses proper heat treated, 52100 bearing steel thrust surfaces on both sides and provides true thrust control integral to the bearing.

RS Roller Bearing KitT

KW Variant 1 (pre-set damping) Coilover Kit for Porsche 911 (996) Carrera 4, 4S; incl. Convertible + Targa, 911 (996) Turbo

$2,889.99

In stock

SKU: KW10271003

"Height adjustable on the front and rear axles (threaded strut housings). If the Porsche Motorsport rear axle top mount # 99633301190 is installed, the KW top mount adapter set # 68510036, price$149, has to be used."

Description

Details

Sporty handling combined with sleek design.
Equipped with factory pre-configured damping.

The KW Variant 1 "inox-line" coilover kit is our entry model for increased driving pleasure with an attractive and individually adjustable lowering. Due to its high-quality finish, the use of struts made from stainless steel, corrosion resistant springs and bump stops as well as compatible components stands for long driving pleasure - not just the car's life.Continuous lowering

With the KW Variant 1 coilover you can achieve maximum lowering in the TÜV-tested adjustment range. Depending on the vehicle model variance ranges between 30 to 70mm or 50 to 90mm. Even after years of use you can easily adjust the height due to the dirt resistant trapezoid thread and composite collar. Lowering at the front axle is made using our one piece composite height adjuster, on the rear axle this is the same unless the car has a seperate spring and shock absorber. The supplied rear height adjuster sits either above or below the rear spring.

KW Variant 1 "inox-line" coilover satisfies the sporty driver with its harmonic basic setup. For each vehicle our engineers develop a specific damper setup and spring rate to increase the driving pleasure with optimal balance of sportiness and practicality. In the end, you are not just buying any coilover, but a KW coilover which has been developed specifically for your particular vehicle. As a manufacturer , KW uses only its own resources, high quality components , and the same damper technology as high-volume manufacturers. With the KW coilovers Variant 1 "inox-line", rolling motions of the body will be reduced during compression giving you the benefit of genuine directness and sportier handling while driving.
Trust In Our Experience

Car drivers, automotive manufacturers , and tuners all around the world rely on our KW coilovers "Made in Germany". Each KW coilover kit, developed and manufactured in the Swabian town Fichtenberg, is subject to extensive stress tests during production to meet the high standards of our KW quality management. As a German manufacturer we give a 2-year warranty on our more than 4600 applications suspension solutions, which exceed OEM quality. The warranty increases up to 5 years when the kit has been installed at one of our KW specialist dealers.

  • Optimally pre-adjusted
  • Sporty and comfortable dampening technology
  • Stainless steel technology "inox-line"
  • Individually height adjustable
  • TÜV-tested adjustment range
  • Ready to install complete solution
  • High quality components for a long durability
  • Complete documentation for easy handling
  • Setup - Factory pre-configured damping setup

The KW Variant 1 "inox-line" coilover has a vehicle-specific, fixed configured damper setup. The spring and damper match perfectly, allowing you to experience an optimized balance of sportiness and comfort while driving.
Even with full load and maximum axle loads, the dampers always work with a sporty characteristic. Tuning fans whose focus are "Show & Shine" events are interested in the KW Variant 1 "inox-line".

Additional

Additional Information

Brand N/A
Year 1998,1999,2000,2001,2002,2003,2004,2005
Make Porsche
Model 996 Carrera 4,996 Carrera 4S,996 Turbo
Part type Suspension
Submodel / Options N/A
Fitment and installation notes N/A
Front lowering adj. range (min-max) - inches 0.9-1.5 (0.6-1.2 in Turbo)
Rear lowering adj. range (min-max) - inches 0.8-1.5 (0.4-1.2 in Turbo)
Front spring rate (lb/in) P
Rear spring rate (lb/in) 630
Shock Technology N/A
Top mount adjustability N/A

Important Seller's Note

Products and services provided by Seller have the potential to substantially raise the torque and horsepower output of an engine. Additionally, high performance parts exert greater stress on engine components. Seller assumes no responsibility for injury or damage resulting from increased torque and horsepower output or failure of any components due to Seller's products and services. Seller urges that Seller's products not be used unless, after an engine has been modified with Seller's parts and services, the owner is able to operate safely, and is willing to accept responsibility for the effects Seller's products and services may have.

It is important to read, understand and accept our Sales and Limited Warranty Terms and Conditions. Privacy Policy can be found here.


Questions or comments? Feel free to contact us before ordering at 815.472.2939 or info@lnengineering.com