Google+
PAGID Brake Pads

Porsche brake pads - front - Pagid RS 1203

Porsche brake pads - front - Pagid RS 1203

$243.00

In stock

SKU: PGF-1203RS-POR

PREMIUM ORGANIC BASED COMPOUND RACING BRAKE PADS


Medium average friction, consistent in-stop behavior with good pedal feedback, progressive release characteristics, exceptional disc life, and low thermal conductivity.


 


NOTE: Refer to the drawing and application table for identification purposes. The photo shown is generic and may not represent the actual pad model. Porsche® cars use many configurations of brake pads - before ordering, always check if the pad model fits your car using application list in description below.

Compounds:



  • RS 14 (Black) - Medium to high friction ceramic type compound with good initial bite, excellent release characteristic, very good modulation and controllability. Low wear rate and fade resistant up to 650°C. GT cars, Touring cars and prototype road racing.
    Instop behavior: Slight-Progressive | Initial bite: Medium-High | Friction level: Medium-High

  • RS 19 (Yellow) - Low pad wear, very disc friendly, wide temperature range, yet most used pad in endurance racing. Due to excellent release characteristics and controllability also often used in shorter sprint races. It maintains a constant friction level at a low range. GT and Touring cars endurance racing; sprint racing where modulation and release characteristics are crucial; also as rear pad in combination with RSL front.
    Instop behavior: Slight-Progressive | Initial bite: Low-Medium | Friction level: Low-Medium

  • RS 29 (Yellow) - Combines the outstanding wear rate of the RS19 with a slightly higher initial bite and torque.GT cars, Touring cars and prototype endurance racing; sprint racing where modulation and release characteristics are crucial.
    Instop behavior: Slight-Progressive | Initial bite: Medium | Friction level: Medium

  • RS 42 (Blue) - Medium friction compound with immediate low temperature response. Very easy bedding process. Classic Rally pad and also very popular in small formula cars, it also fits most classic cars well. Newer compounds have replaced RS42 in some applications.
    Instop behavior: Slight-Progressive | Initial bite: Low | Friction level: Low-Medium

  • RS 44 (Orange) - Medium friction compound with medium initial bite. Very good rear pad for RWD front engine and FWD cars. Classic rallye pad and also very popular in small formula cars and club racing. Newer compounds have replaced RS44 in some applications.
    Instop behavior: Slight-Progressive | Initial bite: Low-Medium | Friction level: Low-Medium


Download Friction vs. Temperature characteristics sheet


 

Description

Details

Ref No.ThicknessMakeModelYearFrontRear
Please check with the appropriate drawing!
1203 17.5 mm Ferrari 348 GTB, GTS, Spider 89 → 94 X X
1203 17.5 mm Ferrari 355 Berlinetta, GTS 94 → 99 X X
1203 17.5 mm Ferrari 456 GT 94 → 96   X
1203 17.5 mm Ferrari 512 Testarossa 92 → 96   X
1203 17.5 mm Ferrari F512M & 550   X
1203 17.5 mm Ferrari 575M Maranello 02 → 06   X
1203 17.5 mm Maserati Spyder 4.2 & Coupe 3.2 02 → 07   X
1203 17.5 mm Porsche 928 S & S4 & GT 85 → 95   X
1203 17.5 mm Porsche 928 5.4 GTS 32V 91 → 95   X
1203 17.5 mm Porsche 944 2.5 Turbo 85 → 87 X X
1203 17.5 mm Porsche 944 2.5 Turbo 87 → 91   X
1203 17.5 mm Porsche 944 2.7 & 3.0 S2 88 → 91 X X
1203 17.5 mm Porsche 964 C2 3.6 88 → 91 X  
1203 17.5 mm Porsche 964 C2 3.6 91 → 94 X X
1203 17.5 mm Porsche 964 3.6 Carrera RS 91 → 93   X
1203 17.5 mm Porsche 964 3.6 C4 88 → 94 X X
1203 17.5 mm Porsche 964 3.3 Turbo & Turbo S 88 → 91   X
1203 17.5 mm Porsche 964 3.3/3.6 Turbo & Turbo S 91 → 93   X
1203 17.5 mm Porsche 968 3.0 Coupe 91 → 95 X X
1203 17.5 mm Porsche 968 3.0 Coupe Sport 91 → 95   X
1203 17.5 mm Porsche 968 3.0 Coupe Turbo S 93 → 95   X
1203 17.5 mm Porsche 993 3.6 Carrera & C4 93 → 97   X
1203 17.5 mm Porsche 911 (964) Coupé 90 → 91   X
1203 17.5 mm Porsche 911 (964) Coupé 91 → 93   X
1203 17.5 mm Porsche 911 (964) Coupé 91 → 91   X
1203 17.5 mm Porsche 911 (964) Coupé 91 → 93   X
1203 17.5 mm Porsche 911 (964) Coupé 88 → 93 X X
1203 17.5 mm Porsche 911 (964) Coupé 91 → 93   X
1203 17.5 mm Porsche 911 (964) Coupé 93 → 93   X
1203 17.5 mm Porsche 911 (964) Cabriolet/Convertible 89 → 94 X X
1203 17.5 mm Porsche 911 (993) Coupé 93 → 97   X
1203 17.5 mm Porsche 911 (993) Coupé 93 → 97   X
1203 17.5 mm Porsche 911 (993) Coupé 94 → 97   X
1203 17.5 mm Porsche 911 (993) Coupé 94 → 97   X
1203 17.5 mm Porsche 911 (993) Coupé 95 → 97   X
1203 17.5 mm Porsche 911 (993) Coupé 95 → 97   X
1203 17.5 mm Porsche 911 (993) Cabriolet/Convertible 94 → 97   X
1203 17.5 mm Porsche 911 (993) Cabriolet/Convertible 94 → 97   X
1203 17.5 mm Porsche 911 (993) Cabriolet/Convertible 94 → 97   X
1203 17.5 mm Porsche 911 (993) Cabriolet/Convertible 94 → 97   X
1203 17.5 mm Porsche 911 (993) Cabriolet/Convertible 95 → 97   X
1203 17.5 mm Porsche 911 (993) Cabriolet/Convertible 95 → 97   X
1203 17.5 mm Porsche 911 (993) Targa 95 → 97   X
1203 17.5 mm Porsche 928 Coupé 85 → 94   X
1203 17.5 mm Porsche 928 Coupé 86 → 91   X
1203 17.5 mm Porsche 928 Coupé 89 → 91   X
1203 17.5 mm Porsche 928 Coupé 86 → 91   X
1203 17.5 mm Porsche 928 Coupé 85 → 86   X
1203 17.5 mm Porsche 944 Coupé 85 → 91   X
1203 17.5 mm Porsche 944 Cabriolet/Convertible 90 → 91   X
1203 17.5 mm Porsche 968 Coupé 91 → 95   X
1203 17.5 mm Porsche 968 Coupé 93 → 95   X
1203 17.5 mm Porsche 968 Cabriolet/Convertible 91 → 95   X
1203 17.5 mm Porsche 911 3.3 SC Turbo / Turbo S 77 → 90 X X

Additional

Additional Information

Brand Pagid
Make Porsche
Model 944 2.5 Turbo,944 2.7 S2,944 3.0 S2,996 Carrera 2,996 Carrera 4,968 Coupe,911 3.3 SC Turbo,911 3.3 SC Turbo S
Year 1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992,1993,1994,1995
Part type Brake Pads

Important Seller's Note

Products and services provided by Seller have the potential to substantially raise the torque and horsepower output of an engine. Additionally, high performance parts exert greater stress on engine components. Seller assumes no responsibility for injury or damage resulting from increased torque and horsepower output or failure of any components due to Seller's products and services. Seller urges that Seller's products not be used unless, after an engine has been modified with Seller's parts and services, the owner is able to operate safely, and is willing to accept responsibility for the effects Seller's products and services may have.

It is important to read, understand and accept our Sales and Limited Warranty Terms and Conditions. Privacy Policy can be found here.


Questions or comments? Feel free to contact us before ordering at 815.472.2939 or info@lnengineering.com