You have no items in your shopping cart.

You have no items to compare.


Bilt Racing Billet Washable 60-micron Racing Oil Filter. (Not for IMS Solution)

More info on LN Engineering's Prop 65 policy

Bilt Racing Billet Washable 60-micron Racing Oil Filter. (Not for IMS Solution)


In stock

SKU: 106-24

Billet Washable 60-micron Racing Oil Filter. Increased porosity stainless mesh - 60 versus the 30 micron of the stock paper filter. For increased flow. For track use only with Spin On Oil Filter Adapter. Replaces Napa 1042 filter.



For those familiar with using an Accusump on your M96 or M97-equipped Boxster, Cayman, or 911, you are probably familiar with the lack of ground clearance, requiring use of a very small (shorty) oil filter. The Bilt Racing Billet Spin-On High Performance Oil Filter uses a slightly increased porosity stainless mesh (60 versus the 30 micron of the stock paper filter). This increase in flow along with a smaller pressure loss across the element ensures the best possible protection for your engine from oil starvation. When coupled with our magnetic drain plug, a superior lubricant like Joe Gibbs XP9, and reduced drain intervals, our billet filter provides the best balance for cars that see both street and track use. With the introduction of our billet filter, for applications where ground clearance needs to be observed, we no longer recommend the Napa Gold 1081 and use of our billet filter is highly recommended for all vehicles used on the track instead of the Napa Gold 1042. The proper procedure for cleaning the filter involves dis-assembly of the filter and removal of the washable element. Wash out filter cup with mineral spirits or similar solvent. Do not get solvent of any type on the o-rings or seals, otherwise they will have to be replaced. Be sure to clean the filter element from the inside out to ensure media is clean. Oil o-rings and seals prior to re-assembly. Pre-fill the oil filter if so desired. Snug up the filter when re-installing and turn 1/2 to 3/4 of a turn tighter by hand as you would a conventional spin on oil filter.


Additional Information

Brand BRS

Important Seller's Note

The Seller, hereby expressly disclaims all warranties either express or implied, including any implied warranty of merchantability or fitness for a particular purpose, and neither assumes nor authorizes any other person to assume for it any liability in connection with the sale of this part(s) and/or service. Buyer shall not be entitled to recover any consequential damages, damages to property, damages for loss of use, loss of time, loss of profits, or income, or any other incidental damages. In addition, expressly excluded is any liability for defects pertaining to safety or performance, by way of ‘‘strict liability’’, negligence or otherwise. In the event of non-payment, the Buyer agrees that the costs of collection including court cost, and reasonable attorney’s fees, shall be recoverable from the Buyer. The Buyer has read and with any transaction, agrees to all of the terms and conditions in connection with the Seller.

Terms: All Returns/Exchanges Require Written or Verbal Pre-Authorization and RMA Number. • Positively No Exchanges Without This Invoice. • No Refunds On Opened Packages Or Used Parts. • Items Returned Must Be In Original Packaging. • No Refunds On Special Orders. • No Return On IMS Parts.• No Refunds After 30 Days. • 25% Handling Charge On All Returned Items. • No Returns On Electrical Parts. • Refund On Purchases Paid By Check Are Refunded After Check Clears.• Any Damage Must Be Reported to the Shipper and LN within 24 Hours of Receipt.

By continuing with your purchase and completing the checkout process you acknowledge and agree with Sales Terms and Conditions.

View also the additional information about Privacy and Security

Questions or comments? Feel free to contact us before ordering. Open a service ticket, call 815.472.2939 or email