Google+
DRIVEN® Engine Oils

Joe Gibbs Racing DRIVEN DT40 02406 Full-Synthetic 5w40 European Sports Car Oil, 12 Quarts


More info on LN Engineering's Prop 65 policy

Joe Gibbs Racing DRIVEN DT40 02406 Full-Synthetic 5w40 European Sports Car Oil, 12 Quarts

$128.15

In stock

SKU: 607-01

Developed in and for the M96/M97 engine for Porsche Boxster, Cayman, and 911 models as a collaboration between Joe Gibbs Racing Driven Oils and Flat 6 Innovations. DT40 is designed for use in most water-cooled, European sports car engines. Utilizes advanced synthetic base oils to provide high temperature and high shear protection for high output, performance engines.



Formulated Specifically For Modern Sports Car Engines


DT40 utilizes advanced synthetic base oils to provide high temperature and high shear protection for turbocharged, as well as European sports car engines with and without variable valve timing. DT40 reduces oil consumption by limiting oil vaporization and foaming. Ideal for modern German, Italian and British sports car engines, as well as Chrysler 6.4L Hemis. Compatible with E85 and water/methanol injection. Viscosity typical of 5W-40.



  • High Temp High Shear Protection

  • ZDDP Anti-Wear Additives

  • Meets Demands Of VVT System

  • Reduced Oil Consumption


Introduction to Joe Gibbs Racing’s Driven Products(150kB)

Description

Details

LN Engineering, aside from offering many products and services for both aircooled and watercooled Porsche models, devotes considerable resources to continued research and development, and most recently, partnering with Raby Engine Development again to develop Porsche-model specific lubricants.*


For years we have tested many lubricants by various manufacturers to ensure we are offering our customers the best protection for their aircooled and watercooled engines, but now, we can offer the first oils specifically developed to meet our requirements that has been tested in our aircooled and watercooled engines! LN Engineering proudly offers the complete line of Joe Gibbs Driven lubricants and automotive fluids. In development for several years, starting February 2012 we will now offer DT40, a high zinc formulation for modern European Sports Cars in a 5w40 viscosity, specifically engineered for street use superior to any oil LN Engineering has previously used or recommended and has been thoroughly tested by Flat 6 Innovations and Jake Raby, coinciding with their joint development of the M96 and M97 engine platform. Additionally, for aircooled models, we now offer DT50, a high zinc formulation for older aircooled engines in a 15w50 viscosity, again specifically tested by Aircooled Technology, another Raby Enterprises company.


Both DT40 and DT50 are 100% fully synthetic motor oils based on group 4 and group 5 base oils with a proprietary additive package developed exclusively for Joe Gibbs by Lubrizol and is not sold or marketed under any other name or brand. So how does Joe Gibbs stand up to the competition? Look below at the results from Lubrizol on the KRL test (CEC L45-A-99), which in fact is one of the most rigorous lubricant tests possible to carry out:  

 

5W-40 DT40

 

Mobil 1 0W-40

 
 

Initial

EOT

Initial

EOT

Kinematic Viscosity @ 100C

13.03

11.41

13.88

8.11

% Difference @ 100C

-12.4

-41.6

Kinematic Viscosity @ 40C

76.81

59.18

76.73

34.16

% Difference @ 40C

-23

-55.5

Viscosity Index

172

191

188

224

HTHS

3.82

3.56

3.85

2.79

% HTHS Difference @ 150C

-6.9

-27.5

For vehicles where DT40 is used on the street, for track use Joe Gibbs only recommends use of their XP9 race oil, specifically developed to resist thinning at the higher temperatures experienced by the M96 engine and also has superior foaming and aeration control, leading to improved oil pressure on the track and less strain on the AOS. Joe Gibbs Driven offers complete engine lubrication solution including assembly grease and break-in oils, developed to provide the best protection possible for your engine and together offers the only lubricants specifically developed and tested for this target market. Joe Gibbs Driven BR (break-in oil) is used by Joe Gibbs Racing to break-in and dyno all their engines, this petroleum oil provides optimum levels of zinc and phosphorus for flat-tappet engines. The additive package promotes ring seal and provides maximum protection available for cams and lifters during initial break-in and does not require additional additives.  *For Porsche approved lubricant we use and recommend Motul 8100 X-Cess 5w40.

Additional

Additional Information

Brand JGDriven

Important Seller's Note

The Seller, hereby expressly disclaims all warranties either express or implied, including any implied warranty of merchantability or fitness for a particular purpose, and neither assumes nor authorizes any other person to assume for it any liability in connection with the sale of this part(s) and/or service. Buyer shall not be entitled to recover any consequential damages, damages to property, damages for loss of use, loss of time, loss of profits, or income, or any other incidental damages. In addition, expressly excluded is any liability for defects pertaining to safety or performance, by way of ‘‘strict liability’’, negligence or otherwise. In the event of non-payment, the Buyer agrees that the costs of collection including court cost, and reasonable attorney’s fees, shall be recoverable from the Buyer. The Buyer has read and with any transaction, agrees to all of the terms and conditions in connection with the Seller.


Terms: All Returns/Exchanges Require Written or Verbal Pre-Authorization and RMA Number. • Positively No Exchanges Without This Invoice. • No Refunds On Opened Packages Or Used Parts. • Items Returned Must Be In Original Packaging. • No Refunds On Special Orders. • No Return On IMS Parts.• No Refunds After 30 Days. • 25% Handling Charge On All Returned Items. • No Returns On Electrical Parts. • Refund On Purchases Paid By Check Are Refunded After Check Clears.• Any Damage Must Be Reported to the Shipper and LN within 24 Hours of Receipt.

By continuing with your purchase and completing the checkout process you acknowledge and agree with Sales Terms and Conditions.

View also the additional information about Privacy and Security

Questions or comments? Feel free to contact us before ordering. Open a service ticket, call 815.472.2939 or email support@lnengineering.com