You have no items in your shopping cart.

You have no items to compare.

Auto Verdi Billet GT3 Oil Pumps

Auto Verdi AVPGT3A 3-Stage Billet Porsche GT3 Oil Pump P3012 30HV


More info on LN Engineering's Prop 65 policy

Auto Verdi Pro Series 3-Stage Billet GT3 Oil Pump (30mm) Porsche Aircooled Mezger Engines

$3,699.00

In stock

SKU: AVPGT3A

The Auto Verdi Pro Series 3-Stage Porsche AVPGT3A Billet Oil Pump come pre-clearanced for most connecting rods and longer stroke crankshafts. The version with 30mm HV pressure side gears is designed for all aircooled street and race 911 engines as an upgrade to the factory Porsche GT3 oil pump. Auto Verdi dry sump oil pumps offer more than just enough oil flow and pressure to your race engine. With lower internal friction losses they take less power away from your engine to run at maximum horsepower. The free hp and best available vacuum give your race engine every advantage. Dyno tests have proven 3-6 hp gains on a well-sealed race engine still maintaining oil pump performance. Use this extra hp to get ahead of the competition. Housings and scavenge rotors are made of a very rigid high quality aircraft aluminum alloy. The material allows for very tight machining tolerances without distortion under maximum loads. The aluminum parts are anodized before PTFE-coating to make for better adhesion. Pressure gears are made of the same quality steel as transmission gears. They are very hard and precision ground to withstand long cycle periods. A Balanit C coating is also applied for minimum friction. The rigid construction of our oil pumps makes them very durable in any kind of racing. Auto Verdi is the leading supplier of oil pumps for NASCAR. Pump weighs 7.5 lbs.

**Note: Case modification/clearancing may be required depending on what engine case is being used, same as with factory gt3 oil pumps**

Download Block Modification Instructions (166kB)

Description

Details

Cross Reference: 996-107-007-94, 99610700794, 996 107 007 94, 996.107.007.94, P3012

Specifications:

Theoretical Volumes per Revolution

Pressure Section

Dia. 41mm 34HV 38.19cm3
Dia. 41mm 32HV 35.94cm3
Dia. 41mm 30HV 33.7cm3

Scavenge Section

Dia. 45mm 30mm 1.181" 43.3cm3
Dia. 45mm 35mm 1.378" 50.5cm3

Please note: 3 pc 30mm scavenge sections on the 4 stg pump; 1pc 30mm and 1pc 35mm on the 3stg pump. Per Auto Verdi's recommendation, it is very important to check the “return line pressure” this should not be over 1-1.5 bar as the Auto Verdi pump will scavenge a lot more oil/air, requiring a high flow filter and oil coolers if installed on the return side. All Auto Verdi pumps require modifications to the case and cannot be "squeezed" at any point.

Additional

Additional Information

Brand AutoVerdi
MPN 996-107-007-94
MSRP No

Important Seller's Note

The Seller, hereby expressly disclaims all warranties either express or implied, including any implied warranty of merchantability or fitness for a particular purpose, and neither assumes nor authorizes any other person to assume for it any liability in connection with the sale of this part(s) and/or service. Buyer shall not be entitled to recover any consequential damages, damages to property, damages for loss of use, loss of time, loss of profits, or income, or any other incidental damages. In addition, expressly excluded is any liability for defects pertaining to safety or performance, by way of ‘‘strict liability’’, negligence or otherwise. In the event of non-payment, the Buyer agrees that the costs of collection including court cost, and reasonable attorney’s fees, shall be recoverable from the Buyer. The Buyer has read and with any transaction, agrees to all of the terms and conditions in connection with the Seller.


Terms: • All Returns/Exchanges Require Written or Verbal Pre-Authorization and RMA Number. • Positively No Exchanges Without This Invoice. • No Refunds On Opened Packages Or Used Parts. • Items Returned Must Be In Original Packaging. • No Refunds On Special Orders. • No Return On IMS Parts. • No Refunds After 30 Days. • 25% Handling Charge On All Returned Items. • No Returns On Electrical Parts. • Refund On Purchases Paid By Check Are Refunded After Check Clears. • Limited Lifetime Warranty on NSC plating provided by Millennium Technologies LLC and subject to their terms and conditions. • There is no warranty on blocks processed with the Nickies Lite direct plating process. • Any Damage Must Be Reported to the Shipper and LN within 24 Hours of Receipt.

By continuing with your purchase and completing the checkout process you acknowledge and agree with Sales Terms and Conditions.

View also the additional information about Privacy and Security

Questions or comments? Feel free to contact us before ordering. Open a support ticket, call 815.472.2939 or email support@lnengineering.com.