Details
Even with a deep sump and added oil, it's possible to cause severe engine damage or have a failure due to the oil becoming too thin and aerated. Aerated oil results in the AOS being overloaded, which can lead to oil ingestion into the intake, causing the engine to smoke or even hydro-lock!
The problem is most modern engines use a water to oil heat exchanger as an oil-warmer for faster engine warm up. Since the oil temperature is directly proportional to coolant temperature, another band-aid is the addition of a 3rd radiator to the vehicle along with our 160F low temperature thermostat.
To solve this problem, deleting the oil to water heat exchanger and adding our oil cooler delete along with an external oil cooler (either air-to-oil or a larger water-to-oil) can lower oil temperatures to a safe level. The 106-22 adapter plate is machined for a -10 o-ring AN fitting and we supply -10 o-ring to -12 fittings for the oil in/out ports.
The 106-33 oil cooler delete provides and additional two AN ports to allow routing of coolant in addition to oil to a remote mounted oil to water heat exchanger.
Inclusion of an external oil thermostat and a thermostatic switch to trigger the fan on an air to oil cooler is recommended to ensure fast warm up and so the cooler doesn't see extreme oil pressures at start-up that may cause damage in cold climates.
The Seller, hereby expressly disclaims all warranties either express or implied, including any implied warranty of
merchantability or fitness for a particular purpose, and neither assumes nor authorizes any other person to assume for it any
liability in connection with the sale of this part(s) and/or service. Buyer shall not be entitled to recover any consequential
damages, damages to property, damages for loss of use, loss of time, loss of profits, or income, or any other incidental
damages. In addition, expressly excluded is any liability for defects pertaining to safety or performance, by way of ‘‘strict
liability’’, negligence or otherwise. In the event of non-payment, the Buyer agrees that the costs of collection including court
cost, and reasonable attorney’s fees, shall be recoverable from the Buyer. The Buyer has read and with any transaction,
agrees to all of the terms and conditions in connection with the Seller.
Terms:
• All Returns/Exchanges Require Written or Verbal Pre-Authorization and RMA Number.
• Positively No Exchanges Without This Invoice.
• No Refunds On Opened Packages Or Used Parts.
• Items Returned Must Be In Original Packaging.
• No Refunds On Special Orders.
• No Return On IMS Parts.
• No Refunds After 30 Days.
• 25% Handling Charge On All Returned Items.
• No Returns On Electrical Parts.
• Refund On Purchases Paid By Check Are Refunded After Check Clears.
• Limited Lifetime Warranty on NSC plating provided by Millennium Technologies LLC and subject to their terms and conditions.
• There is no warranty on blocks processed with the Nickies Lite direct plating process.
• Any Damage Must Be Reported to the Shipper and LN within 24 Hours of Receipt.