You have no items in your shopping cart.

You have no items to compare.

M96 Engine

ARP 204-6301 M96/M97 Rod Bolts for Stock Porsche Boxster, Cayman, 911 Connecting Rods


More info on LN Engineering's Prop 65 policy

ARP 204-6301 M96/M97 Rod Bolts for Stock Porsche Boxster, Cayman, 911 Connecting Rods

$172.99

In stock

SKU: 204-6301

ARP 204-6301 M96/M97 Porsche 986/987/996/997 M9 Rod Bolt Kit. Fits Boxster, Cayman, and 911 models from 1997 through 2008 with the factory cracked cap connecting rods.

The stock rod bolts are a torque to yield (TTY) bolt, meaning they must be replaced. ARP rod bolts are a must when rebuilding any 1997-2008 Porsche Boxster, Cayman, or 911 model with M96 or M97 engine and retaining the factory connecting rods to prevent costly rod bolt failures due to stretched rod bolts.

Don't risk a failure by reusing weak factory rod bolts. Upgrade to ARPs and never worry about your Porsche connecting rod bolts ever again!

If you plan on tracking your car or you are increasing your displacement, consider upgrading to Carrillo rods which come with upgraded rod bolts as well as coated rod bearings.

Installation Method for Porsche Rod Bolt Kit


Part Number: 204-6301

Application: Porsche 996 / 997 / 986 / 987 (M9) Cap Screw without Washer



  1. Please check the part-number(s) for your application against the part-number(s) listed on the instruction sheet.

  2. Make sure there is an adequate chamfer around the bolt hole on the connecting rod cap to clear the radius under the head of the bolt.

  3. Use ARP Ultra-Torque Fastener Assembly Lubricant to lubricate the threads of the bolt and the under head of the bolt. Then install the bolts and tighten them hand tight.

  4. ARP recommends using the STRETCH METHOD when tightening rod bolts. Following the instructions for using a stretch gauge, stretch the bolts to .0095 - .0100.

  5. If you do not have a stretch gauge, torque the bolts to 45 ft-lbs using ARP Ultra-Torque Fastener Assembly Lubricant.

  6. The connecting rods should always be re-sized after new rod bolts are installed.

  7. A log should be kept on the original non-torqued length of each bolt. Bolts that have any permanent deformation or have increased in non-torqued length by more than .001 in. should be replaced.


Description

Details

Cross Reference: 204-6301, 99610311551, 996-103-115-51, 996.103.115.51, 996 103 115 51, 997-103-115-01, 997 103 115 01, 997.103.115.01, 99710311501

Additional

Additional Information

Brand ARP
MPN 99610311551
MSRP No

Important Seller's Note

The Seller, hereby expressly disclaims all warranties either express or implied, including any implied warranty of merchantability or fitness for a particular purpose, and neither assumes nor authorizes any other person to assume for it any liability in connection with the sale of this part(s) and/or service. Buyer shall not be entitled to recover any consequential damages, damages to property, damages for loss of use, loss of time, loss of profits, or income, or any other incidental damages. In addition, expressly excluded is any liability for defects pertaining to safety or performance, by way of ‘‘strict liability’’, negligence or otherwise. In the event of non-payment, the Buyer agrees that the costs of collection including court cost, and reasonable attorney’s fees, shall be recoverable from the Buyer. The Buyer has read and with any transaction, agrees to all of the terms and conditions in connection with the Seller.


Terms: • All Returns/Exchanges Require Written or Verbal Pre-Authorization and RMA Number. • Positively No Exchanges Without This Invoice. • No Refunds On Opened Packages Or Used Parts. • Items Returned Must Be In Original Packaging. • No Refunds On Special Orders. • No Return On IMS Parts. • No Refunds After 30 Days. • 25% Handling Charge On All Returned Items. • No Returns On Electrical Parts. • Refund On Purchases Paid By Check Are Refunded After Check Clears. • Limited Lifetime Warranty on NSC plating provided by Millennium Technologies LLC and subject to their terms and conditions. • There is no warranty on blocks processed with the Nickies Lite direct plating process. • Any Damage Must Be Reported to the Shipper and LN within 24 Hours of Receipt.

By continuing with your purchase and completing the checkout process you acknowledge and agree with Sales Terms and Conditions.

View also the additional information about Privacy and Security

Questions or comments? Feel free to contact us before ordering. Open a support ticket, call 815.472.2939 or email support@lnengineering.com.