Google+
RS Roller Bearing IMS retrofit kits

Single Row RND Roller Bearing IMS Retrofit kit

Single Row RND Roller Bearing IMS Retrofit kit

$699.00

In stock

SKU: 106-08.2R

The only IMS roller bearing retrofit kit with true thrust control.


Cylindrical bearings provide great lateral load capacity, sacrificing their maximum load cap in thrust (axial movement). That’s why precise thrust control is crucial for bearing’s longevity and reliability. RND Roller Bearing IMS Retrofit kit is the only solution on the market that uses proper heat treated, 52100 bearing steel thrust surfaces on both sides.


Manufactured by RND Engines and distributed exclusively by SSF Auto Parts, RS Roller Bearing Kits sport 2-year/24,000 miles limited parts warranty provided by SSF Auto Parts with professional installation and proper IMS procedure pre-qualification. Recommended service interval 4 years or 50,000 miles.


Why do IMS bearings fail?



  • Lack of lubrication (sealed bearing was used)

  • Insufficient load capacity (factory single row bearing had high failure rate of 8% according to the Eisen class action lawsuit)

  • The factory did not supply a service interval, replacement, or tools for changing the original bearing out – bearing should have had a service interval!


IMS Retrofit as a preventative maintenance:



  • IMS replacement takes an average of 10-14 hours.

  • Typically coupled with clutch and other maintenance.

  • Engine rebuilds take 60+ hours and can cost tens of thousands of dollars.

  • Engines must be pre-qualified prior to bearing replacement.


What factory bearing does my engine have?



  • 1997-1999: This engine featured a dual row bearing IMS

  • 2000-2001: These engines came from the factory with either a dual row or a single row bearing IMS

  • 2002-2005: This engine featured a single row bearing IMS. Some late production 2005 models will have a non-servicable IMS.

  • 2006-2008: These engines were fitted with a larger bearing that is not serviceable without a complete teardown of the engine.

  • If the engine in your car has been replaced, it will have whatever IMS bearing was in production for that model year of manufacture for the replacement engine.

Use IMS Pro Toolkit part number 106-08.13 for installation. No oil system modifications required!


Download Instructions and Warranty form (150kB). If your browser doesn't support online form filling, please right click this link and save the form to your computer as a PDF file.



Download Installation Manual from RND Engines website.




Additional

Additional Information

Brand LNE

Important Seller's Note

Products and services provided by Seller have the potential to substantially raise the torque and horsepower output of an engine. Additionally, high performance parts exert greater stress on engine components. Seller assumes no responsibility for injury or damage resulting from increased torque and horsepower output or failure of any components due to Seller's products and services. Seller urges that Seller's products not be used unless, after an engine has been modified with Seller's parts and services, the owner is able to operate safely, and is willing to accept responsibility for the effects Seller's products and services may have.

By continuing with your purchase and completing the checkout process you acknowledge and agree with Sales Terms and Conditions.

View also the additional information about Privacy and Security

Questions or comments? Feel free to contact us before ordering. Open a service ticket, call 815.472.2939 or email support@lnengineering.com