Bilt Racing Service BRS HPDE 2 Quart Accusump Universal Kit MY97-08 M96/M97
$1,750.00
The Accusump is the original automotive oil accumulator used to prevent oil starvation. The Accusump is connected to the pressure side of an engine’s oiling system and is charged by the engines own oil pump. Its simple, efficient design revolves around a hydraulic piston separating an air pre-charge side and an oil reservoir side. On the oil side of the Accusump it has an outlet that goes into the engine’s oiling system, controlled by a valve.
The Accusump is designed collect pressurized oil from your engine and store it so it may be discharged later during low oil pressure surges to protect against engine damage during demanding racing conditions. After the oil pressure stabilizes, the piston inside the Accusump moves back and forth, pressurizing the Accusump until it equalizes with engine’s oil pressure. The Electric Pressure Control Valve we use is for a discharge/refill of 35-40 PSI. These valves have the convenience of an electric valve for remote mounted units on daily drivers but with the rapid refill rate of a manual valve as required in racing. The E.P.C. valving will only allow the Accusump to discharge oil when the engine’s oil pressure drops below a predetermined level and only refill when the pressure rises above that level.
The Bilt Racing HPDE Accusump kit is easy to install, requiring plumbing of only a single oil line. Our universal Accusump kit has everything you need to carry out a custom Accusump installation in your Boxster, Cayman, or 911, sans wiring or electrical pieces and includes:
- Two quart Marine Accusump system
- LN Engineering’s Spin-On Full-Flow Oil Filter Adapter
- Custom single input sandwich adapter (for easy one-line installation – fits standard 106-01 Spin On Oil Filter Adapter set up to accept a filter with 13/16-16 thread
- 45 psi electronic valve, hose, and fittings
Please note: Oil filter will sit approximately 1″ lower than in the factory configuration. In conjunction with the installation of an Accusump, we recommend adding an X51 oil baffle and 997 oil return tubes for improved oil control and ensure scavenge oil is returned to the sump as quickly as possible and Driven XP9 Racing Oil; A sump guard is highly recommended.
Alternatively, a two quart deep sump, part number 106-00.1 can be used to address oil starvation concerns in M96 and M97 engines which includes an X-51 style baffle, 997 oil return tubes, and anti-slosh tray for optimal oil control.
NOTE: This item does not qualify for free shipping. Oversized items or items shipped by freight are subject to additional shipping charges in addition to what you will be charged at checkout. You will be contacted with additional shipping charges prior to shipping.
Does not fit Porsche 911 GT3, Turbo, or GT2 models.
Instructions for installation and operation of the accusump can be found here:
https://www.cantonracingproducts.com/content/Instructions/instructions.pdf
Canton also has a list of dos and do nots that is also important to review:
https://blog.cantonracingproducts.com/blog/accusump-install-dos-do-nots
Description
Bilt Racing Service BRS HPDE 2 Quart Accusump Universal Kit MY97-08 M96/M97
Important: Before ordering, always confirm that the part fits your specific type/model/engine.
Additional information
| Weight | 20 lbs |
|---|
- Images are stock photos. Actual product may vary. While we strive to ensure that all product images and descriptions on our website are accurate, slight variations in appearance may occur due to updates in design, manufacturing processes, or material finishes. These differences do not affect the functionality or quality of the product. If you have specific concerns or need more details before purchasing, please contact our customer support team for assistance.
- Some items may be special order, out of stock, subject to additional freight charges, or import duties. Customers will be contacted for any of these special situations for customer approval before proceeding with any order.
- The Seller, hereby expressly disclaims all warranties either express or implied, including any implied warranty of merchantability or fitness for a particular purpose, and neither assumes nor authorizes any other person to assume for it any liability in connection with the sale of this part(s) and/or service. Buyer shall not be entitled to recover any consequential damages, damages to property, damages for loss of use, loss of time, loss of profits, or income, or any other incidental damages. In addition, expressly excluded is any liability for defects pertaining to safety or performance, by way of ‘‘strict liability’’, negligence or otherwise. In the event of non-payment, the Buyer agrees that the costs of collection including court cost, and reasonable attorney’s fees, shall be recoverable from the Buyer. The Buyer has read and with any transaction, agrees to all of the terms and conditions in connection with the Seller.
- Terms: • All Returns/Exchanges Require Written or Verbal Pre-Authorization and RMA Number. • Positively No Exchanges Without This Invoice. • No Refunds On Opened Packages Or Used Parts. • Items Returned Must Be In Original Packaging. • No Refunds On Special Orders. • No Return On IMS Parts. • No Refunds After 30 Days. • 25% Handling Charge On All Returned Items. • No Returns On Electrical Parts. • Refund On Purchases Paid By Check Are Refunded After Check Clears. • Limited Lifetime Warranty on NSC plating provided by Millennium Technologies LLC and subject to their terms and conditions. • There is no warranty on blocks processed with the Nickies Lite direct plating process. • Any Damage Must Be Reported to the Shipper and LN within 24 Hours of Receipt.

Some products sold by LN Engineering LLC or on https://www.LNengineering.com contain or may contain chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. LN Engineering has chosen to provide a warning based on its knowledge of the presence of one or more listed chemicals without evaluating the exposure. Products may contain chemicals in amounts acceptable by the safe harbor levels as outlined by Proposition 65, or not at all, however we have chosen to issue this warning on all of our products as an act of caution.









