You have no items in your shopping cart.

You have no items to compare.

DRIVEN Products

Driven DT50 Full-Synthetic 15w50 Engine Oil (Case of 12 Quarts) 02806


More info on LN Engineering's Prop 65 policy

Driven DT50 Full-Synthetic 15w50 Engine Oil (Case of 12 Quarts) 02806

$203.88

In stock

SKU: 607-02

Originally co-developed by Joe Gibbs Racing Driven Oils and Raby's Aircooled Technology, DT50 is designed for high performance, vintage air-cooled engines like those found in Porsche 356, 911, 912, and 914 models. Utilizes advanced synthetic base oils to provide high temperature protection and high shear protection for high output, performance engines. High zinc content protects cams and lifters.


Formulated Specifically For High Output Air-Cooled Engines


DT50 utilizes advanced mPAO synthtetic base oils to provide protection for high operating temperature turbocharged engines. Also ideal for Porsche and Volkswagen air-cooled engines. Compatible with E85 and water/methanol injection. Viscosity typical of 15W-50.


Note: We recommend DT50 in place of Driven HR3 (HR-3) Synthetic Hot Rod Oil.


High Temp High Shear Protection


Friction Reducing Additives


ZDDP Anti-Wear Package


Storage & Start-Up Protection


Driven DT oils do not meet ILSAC GF-6A, GF-6B, and API SP standards and is not recommended for vehicles with particulate filters or where emission system or LSPI protection is required; Driven DI oils are recommended for these applications. Safe for use on vehicles with catalytic convertors.


Description

Details

LN Engineering, aside from offering many products and services for both aircooled and watercooled Porsche models, devotes considerable resources to continued research and development, and most recently, partnering with Raby Engine Development again to develop Porsche-model specific lubricants.*

For years we have tested many lubricants by various manufacturers to ensure we are offering our customers the best protection for their aircooled and watercooled engines, but now, we can offer the first oils specifically developed to meet our requirements that has been tested in our aircooled and watercooled engines! LN Engineering proudly offers the complete line of Joe Gibbs Driven lubricants and automotive fluids. In development for several years, starting February 2012 we will now offer DT40, a high zinc formulation for modern European Sports Cars in a 5w40 viscosity, specifically engineered for street use superior to any oil LN Engineering has previously used or recommended and has been thoroughly tested by Flat 6 Innovations and Jake Raby, coinciding with their joint development of the M96 and M97 engine platform. Additionally, for aircooled models, we now offer DT50, a high zinc formulation for older aircooled engines in a 15w50 viscosity, again specifically tested by Aircooled Technology, another Raby Enterprises company.

Both DT40 and DT50 are 100% fully synthetic motor oils based on group 4 and group 5 base oils with a proprietary additive package developed exclusively for Joe Gibbs by Lubrizol and is not sold or marketed under any other name or brand. So how does Joe Gibbs stand up to the competition? Look below at the results from Lubrizol on the KRL test (CEC L45-A-99), which in fact is one of the most rigorous lubricant tests possible to carry out:  

 

5W-40 DT40

 

Mobil 1 0W-40

 
 

Initial

EOT

Initial

EOT

Kinematic Viscosity @ 100C

13.03

11.41

13.88

8.11

% Difference @ 100C

-12.4

-41.6

Kinematic Viscosity @ 40C

76.81

59.18

76.73

34.16

% Difference @ 40C

-23

-55.5

Viscosity Index

172

191

188

224

HTHS

3.82

3.56

3.85

2.79

% HTHS Difference @ 150C

-6.9

-27.5

  For vehicles where DT40 is used on the street, for track use Joe Gibbs only recommends use of their XP9 race oil, specifically developed to resist thinning at the higher temperatures experienced by the M96 engine and also has superior foaming and aeration control, leading to improved oil pressure on the track and less strain on the AOS. Joe Gibbs offers complete engine lubrication solution including assembly grease and break-in oils, developed to provide the best protection possible for your engine and together offers the only lubricants specifically developed and tested for this target market. Joe Gibbs BR (break-in oil) is used by Joe Gibbs Racing to break-in and dyno all their engines, this petroleum oil provides optimum levels of zinc and phosphorus for flat-tappet engines. The additive package promotes ring seal and provides maximum protection available for cams and lifters during initial break-in and does not require additional additives. Above providing the highest quality products for our engines, Joe Gibbs has invested in providing excellent technical information regarding lubricants and how their selection is critical. For those interested, we have a Racing Oil "101" available as well as Joe Gibb's Lubrication Guide, both in PDF format. *For Porsche approved lubricant we use and recommend Motul 8100 X-Cess 5w40. DT50 is also available special order in a 55 gallon drum (part number 02820) by calling LN Engineering at 815-472-2939.

Additional

Additional Information

Brand Driven
MPN 02806
MSRP No

Important Seller's Note

The Seller, hereby expressly disclaims all warranties either express or implied, including any implied warranty of merchantability or fitness for a particular purpose, and neither assumes nor authorizes any other person to assume for it any liability in connection with the sale of this part(s) and/or service. Buyer shall not be entitled to recover any consequential damages, damages to property, damages for loss of use, loss of time, loss of profits, or income, or any other incidental damages. In addition, expressly excluded is any liability for defects pertaining to safety or performance, by way of ‘‘strict liability’’, negligence or otherwise. In the event of non-payment, the Buyer agrees that the costs of collection including court cost, and reasonable attorney’s fees, shall be recoverable from the Buyer. The Buyer has read and with any transaction, agrees to all of the terms and conditions in connection with the Seller.


Terms: • All Returns/Exchanges Require Written or Verbal Pre-Authorization and RMA Number. • Positively No Exchanges Without This Invoice. • No Refunds On Opened Packages Or Used Parts. • Items Returned Must Be In Original Packaging. • No Refunds On Special Orders. • No Return On IMS Parts. • No Refunds After 30 Days. • 25% Handling Charge On All Returned Items. • No Returns On Electrical Parts. • Refund On Purchases Paid By Check Are Refunded After Check Clears. • Limited Lifetime Warranty on NSC plating provided by Millennium Technologies LLC and subject to their terms and conditions. • There is no warranty on blocks processed with the Nickies Lite direct plating process. • Any Damage Must Be Reported to the Shipper and LN within 24 Hours of Receipt.

By continuing with your purchase and completing the checkout process you acknowledge and agree with Sales Terms and Conditions.

View also the additional information about Privacy and Security

Questions or comments? Feel free to contact us before ordering. Open a support ticket, call 815.472.2939 or email support@lnengineering.com.