You have no items in your shopping cart.

You have no items to compare.

VW Engine Kits

Type 4 Store Performance Engine Rebuild Kits for VW Type 4 Engines

LN Engineering's Type 4 Store offers exclusive engine rebuild kits for Porsche 914, 912E, and VW Type 2 Bus and Transporter models with the Type 4 engine. These kits were originally designed by Jake Raby's Aircooled Technology and have been improved over time to include upgrades like LN Engineering's Nickies cylinders, proprietary camshaft grinds, and the latest in cylinder head development. These are proven combinations that deliver on the performance and reliability you have come to expect from LN Engineering and The Type 4 Store. Do it right and build it once to last.

We know it's a big investment - we are here to help. If you have questions about any of our engine kits, please do not hesitate to contact our Type 4 specialist, Nicole. She can be reached Monday through Friday, 8:30 AM to 5 PM CST, by calling 815-472-2939 extension 102 or by opening a support ticket on our website 24/7.

Please note that engine kits do not come with recommendations for jetting or tuning. There are too many variables including exhaust, elevation, intake fuel system (fuel injection or carbs), climate, fuel, etc - all of which affect tuning. You’ll need a wide band o2 sensor to verify your jetting. Ideally you want your target AFR to be 12.8:1-13.2 under full throttle – part throttle and idle can be a bit leaner in the high 13s to low 14s. As far as timing, you can start with somewhere between 28-32 degrees full advance at 3500 rpm, but again, this isn’t a hard and steadfast rule. We would recommend going onto the shoptalkforums to see if anyone has a recommendations or you can refer to one of many carb tuning books that provide baselines to start with.

SKU
Set Descending Direction

Grid List

10 per page

3 Item(s)

  1. 2056-120 Type 4 Conversion Engine Kit

    SKU: 45100

    $7,000.00

    Images for illustration purpose only. Actual product may vary. You will receive the kit as listed in the description

    All Type 4 Store engine kits include most everything needed and include the same parts used in all Aircooled Technology engine builds as we are Aircooled Technology’s exclusive parts supplier for everything Type 4!

    Type 4 Store cylinder heads feature ceramic coated combustion chambers, exhaust ports, valve tops and underside of exhaust valves for improved longevity and durability, providing protection from short bursts of elevated EGT (exhaust gas temperatures) that can shorten cylinder head valve job life.

    NOTE: YOU MUST BORE OUT & HONE FACTORY OE GERMAN CYLINDERS FOR USE WITH KEITH BLACK PISTONS. Target compression ratio is 8.25:1 with 1.5mm deck on pump premium unleaded fuels.

    As all kits are special order, they must be paid for at the time the order is placed. Please allow 6-10 weeks for delivery. All orders are filled first come, first served. It is highly recommended that you contact the Type 4 Store before ordering to ensure you are ordering the right kit and to check on current lead times.

    NOW AVAILABLE WITH YOR CHOICE OF COOLING SYSTEM! SELECT YOUR OPTIONS BELOW.

    See an itemized list of all the components included in the kits below.

    Due to high demand there will be extended lead times on all DTM and Engine Kit purchases. DTM and Engine Kits do not qualify for free shipping. Customers will be contacted with estimated lead time after your order is received and also prior to shipping for payment for actual shipping charges on these oversized items. We recommend calling first before ordering for current availability and lead time. Learn More
  2. 2270-145 Type 4 Conversion Engine Kit

    SKU: 45200

    $7,495.00

    Images for illustration purpose only. Actual product may vary. You will receive the kit as listed in the description

    All Type 4 Store engine kits include most everything needed and include the same parts used in all Aircooled Technology engine builds as we are Aircooled Technology’s exclusive parts supplier for everything Type 4!

    Type 4 Store cylinder heads feature ceramic coated combustion chambers, exhaust ports, valve tops and underside of exhaust valves for improved longevity and durability, providing protection from short bursts of elevated EGT (exhaust gas temperatures) that can shorten cylinder head valve job life.

    NOTE: YOU MUST BORE OUT & HONE FACTORY OE GERMAN CYLINDERS TO USE SUPPLIED KEITH BLACK PISTONS. Target compression ratio is 9.0:1 with 1.5mm deck on pump premium unleaded fuels.

    As all kits are special order, they must be paid for at the time the order is placed. Please allow 6-10 weeks for delivery. All orders are filled first come, first served. It is highly recommended that you contact the Type 4 Store before ordering to ensure you are ordering the right kit and to check on current lead times.

    NOW AVAILABLE WITH YOR CHOICE OF COOLING SYSTEM! SELECT YOUR OPTIONS BELOW.

    See an itemized list of all the components included in the kits below.

    Due to high demand there will be extended lead times on all DTM and Engine Kit purchases. DTM and Engine Kits do not qualify for free shipping. Customers will be contacted with estimated lead time after your order is received and also prior to shipping for payment for actual shipping charges on these oversized items. We recommend calling first before ordering for current availability and lead time. Learn More
  3. 2563-190 Type 4 Conversion Engine Kit

    SKU: 45500

    $11,255.00

    Images for illustration purpose only. Actual product may vary. You'll receive the kit as listed in the description

    All Type 4 Store engine kits include most everything needed and include the same parts used in all Aircooled Technology engine builds as we are Aircooled Technology’s exclusive parts supplier for everything Type 4!

    Type 4 Store cylinder heads feature ceramic coated combustion chambers, exhaust ports, valve tops and underside of exhaust valves for improved longevity and durability, providing protection from short bursts of elevated EGT (exhaust gas temperatures) that can shorten cylinder head valve job life.

    This engine kit features Nickies cylinders and JE Pistons at a discounted price when purchased through the Type 4 Store. Target compression ratio is 9.3:1 using pump 91 octane or 9.8:1 using pump 93 octane (R+M)/2.

    As all kits are special order, they must be paid for at the time the order is placed. Please allow 6-10 weeks for delivery. All orders are filled first come, first served. It is highly recommended that you contact the Type 4 Store before ordering to ensure you are ordering the right kit and to check on current lead times.

    NOW AVAILABLE WITH YOR CHOICE OF COOLING SYSTEM! SELECT YOUR OPTIONS BELOW.

    See an itemized list of all the components included in the kits below.

    Due to high demand there will be extended lead times on all DTM and Engine Kit purchases. DTM and Engine Kits do not qualify for free shipping. Customers will be contacted with estimated lead time after your order is received and also prior to shipping for payment for actual shipping charges on these oversized items. We recommend calling first before ordering for current availability and lead time. Learn More
SKU
Set Descending Direction

Grid List

10 per page

3 Item(s)